Elea 8 XLR ArtNet DMX Kumandası
Product Code :
ELEA8001
Category :
Tags :
Zenopix ELEA 8 XLR is a professional Art-Net to DMX512 converter and controller designed to convert Art-Net packets into DMX-512 outputs. It also functions as a reliable Art-Net playback controller, meeting the demands of modern stage and architectural lighting systems.
Key Features
- High-Speed ARM Processor: Ensures fast, stable, and efficient performance.
- UDP-Based Art-Net Protocol over Ethernet: Provides reliable and seamless data transmission.
- 8 XLR DMX Output Ports: Supports 8 DMX universes, with 512 channels per port, delivering a total capacity of 4,096 DMX channels.
- LED Pixel Matrix and Stage Lighting Compatibility: Integrates seamlessly with LED pixel systems, stage lighting fixtures, and other Art-Net compatible lighting equipment.
Product Features
Connections and Status Indicators
The Zenopix ELEA 8 XLR features a user-friendly design with the following interfaces and indicators: 8 XLR DMX Outputs: Allow easy connection to multiple lighting fixtures and DMX devices. 1 × USB Type-B Port and 1 × RJ45 Ethernet Port: Provide flexible configuration and network connectivity. Status LEDs: Red LED: Illuminates when the Ethernet connection is lost. Green LED: Flashes every 2.5 seconds to indicate normal device operation. Factory Reset Button: Restores the controller to its default factory settings with a single press. Installation and Configuration The Zenopix ELEA 8 XLR includes a built-in web-based configuration interface that makes setup quick and intuitive. To access the web interface, configure your computer using the appropriate network settings before connecting to the controller.| Parameter | Default Value |
|---|---|
| IP Address | 192.168.1.250 |
| Subnet Mask | 255.255.255.0 |
| Gateway | 192.168.1.1 |
| DMX Port Addresses | 1–8 |
| Specification | Value |
|---|---|
| Power Supply | 12–24 V DC (Terminal Block Connector) |
| Power Consumption | < 5 W (During Normal Operation) |
| Network Protocol | Art-Net |
| DMX512 | 8 × 512 DMX Channels / Universes |
| Output Ports | 3-Pin Female XLR (NEUTRIK) |
| Ethernet | 1 × RJ45, 10/100 Mbps |
| USB | 1 × USB 2.0 Type-B Port |
| Status Indicators | 2 × Status LEDs |
| Enclosure | Aluminum |
| Dimensions | Rack Mount: 480 × 83 × 44 mm |
| Operating Temperature & Humidity | -15°C to +65°C / 20% RH |
| Storage Temperature & Humidity | -25°C to +75°C / 70% RH |
| Protection Rating | IP20 |
| Mounting Type | Wall Mount or Rack Mount |
- Do not install this controller in areas exposed to lightning, strong magnetic fields, or high-voltage environments.
- Ensure all connections are made correctly to prevent component damage and reduce the risk of fire caused by short circuits.
- Always install the unit in a well-ventilated location to ensure proper airflow and maintain a safe operating temperature.
- Before powering on the controller, verify that the input voltage and power supply are compatible with the device.
- Do not connect or disconnect any cables while the power is on. Before switching on the device, ensure that all connections are correct and that there are no short circuits.
- Do not attempt unauthorized repairs. If any malfunction occurs, please contact your supplier or an authorized service provider.
- This manual applies only to this product model. Specifications and contents are subject to change without prior notice.