Elea 8 TB ArtNet DMX Controller
Zenopix ELEA 8 TB is an 8-port DMX output Art-Net playback controller designed for professional LED lighting and stage control applications. It converts Art-Net data transmitted over Ethernet into DMX-512 output, enabling seamless communication between lighting control software and DMX-compatible fixtures. Designed for reliability and high-performance operation, the Zenopix ELEA 8 TB receives Art-Net packets via an Ethernet network and converts them into DMX-512 signals for connected lighting devices. Powered by a high-speed ARM processor, the controller ensures stable, accurate, and dependable performance even in demanding installations.
Key Features
- Ethernet-based Art-Net control system
- RJ45 network interface
- UDP communication protocol
- Art-Net standard protocol support
- DMX512 output interface
- 8 independent DMX512 output ports (8 universes)
Product Features
In terms of hardware, the controller features 8 DMX outputs with terminal block connectors, a USB-B port, an Ethernet port, and two status LEDs for system monitoring. A dedicated status indicator LED flashes during normal operation to confirm that the device is functioning correctly. The controller also includes a factory reset button, allowing users to restore the default settings whenever necessary.
The Zenopix ELEA 8 TB includes a built-in web-based configuration interface for easy setup and management. To access the interface, configure your computer with the following default network settings.
| Parameter | Default Value |
|---|---|
| IP Address | 192.168.1.250 |
| Subnet Mask | 255.255.255.0 |
| Gateway | 192.168.1.1 |
| DMX Port Addresses | 1–8 |
| Specification | Value |
|---|---|
| Power Supply | 12–24 V DC (Terminal Block Connector) |
| Power Consumption | < 5 W (During Normal Operation) |
| Network Protocol | Art-Net |
| DMX512 | 8 × 512 DMX Channels / Universes |
| Output Ports | 3-Pin, 5.08 mm Terminal Block |
| Ethernet | 1 × RJ45, 10/100 Mbps |
| USB | 1 × USB 2.0 Type-B Port |
| Status Indicators | 2 × Status LEDs |
| Enclosure | Aluminum |
| Dimensions | Rack Mount: 480 × 83 × 44 mm |
| Operating Temperature & Humidity | -15°C to +65°C / 20% RH |
| Storage Temperature & Humidity | -25°C to +75°C / 70% RH |
| Protection Rating | IP20 |
| Mounting Type | Wall Mount or Rack Mount |
- Do not install this controller in areas exposed to lightning, strong magnetic fields, or high-voltage environments.
- Ensure all wiring is connected correctly to prevent component damage and reduce the risk of fire caused by short circuits.
- Always install the unit in a well-ventilated location to ensure adequate heat dissipation and maintain a suitable operating temperature.
- Verify that the input voltage and power supply are compatible with the controller before use.
- Do not connect or disconnect any cables while the power is on. Ensure all connections are correct and that there are no short circuits before powering on the device.
- Do not attempt unauthorized repairs. If any problems occur, please contact your supplier or authorized technical support.
- This manual applies only to this product model. Specifications and contents are subject to change without prior notice.
Zenopix Smart City and Lighting Systems
Address
Konutkent Mahallesi, 3028 Sokak, Elmar Towers C Blok, No: 8C/120, Çankaya/Ankara/Türkiye
+90 312 911 26 46 I info@zenopix.com