Elea 8 TB ArtNet DMX Controller
Zenopix ELEA 8 TB is an 8-port DMX output Art-Net playback controller designed for professional LED lighting and stage control applications. It converts Art-Net data transmitted over Ethernet into DMX-512 output, enabling seamless communication between lighting control software and DMX-compatible fixtures. Designed for reliability and high-performance operation, the Zenopix ELEA 8 TB receives Art-Net packets via an Ethernet network and converts them into DMX-512 signals for connected lighting devices. Powered by a high-speed ARM processor, the controller ensures stable, accurate, and dependable performance even in demanding installations.
Key Features
- Ethernet-based Art-Net control system
- RJ45 network interface
- UDP communication protocol
- Art-Net standard protocol support
- DMX512 output interface
- 8 independent DMX512 output ports (8 universes)
Product Features
In terms of hardware, the controller features 8 DMX outputs with terminal block connectors, a USB-B port, an Ethernet port, and two status LEDs for system monitoring. A dedicated status indicator LED flashes during normal operation to confirm that the device is functioning correctly. The controller also includes a factory reset button, allowing users to restore the default settings whenever necessary.
The Zenopix ELEA 8 TB includes a built-in web-based configuration interface for easy setup and management. To access the interface, configure your computer with the following default network settings.
| Parameter | Default Value |
|---|---|
| IP Address | 192.168.1.250 |
| Subnet Mask | 255.255.255.0 |
| Gateway | 192.168.1.1 |
| DMX Port Addresses | 1–8 |
| Specification | Value |
|---|---|
| Input Voltage Range | 12–24 VDC (Adapter or Terminal Block) |
| Power Consumption | <5 W (Normal Operating Conditions) |
| Network Protocol | Art-Net / DMX |
| DMX512 Universe | 8 × 1024 DMX Channel Outputs |
| Output Ports | 3-Pin, 5.08 Terminal 3-Pin XLR Female for Cabinet Type Case |
| Ethernet | 1 × RJ45, 10/100 Mbit/s |
| USB | 1 × USB 2.0 Type B port |
| Status LEDs | 2 Pieces |
| Case | 6082 Cabinet Type Aluminum or ABS |
| Dimensions | Cabinet Mount: 483 × 82.5 × 45 mm DIN Rail Type: 158 × 90 × 58 mm |
| Temperature and Humidity | Operating: -10°C – 65°C / 20% RH Storage: -25°C – 75°C / 70% RH |
| Protection | IP-20 |
| Mounting Type | Wall / Cabinet Mounting – Rail Type |
- Do not install this controller in areas exposed to lightning, strong magnetic fields, or high-voltage environments.
- Ensure all wiring is connected correctly to prevent component damage and reduce the risk of fire caused by short circuits.
- Always install the unit in a well-ventilated location to ensure adequate heat dissipation and maintain a suitable operating temperature.
- Verify that the input voltage and power supply are compatible with the controller before use.
- Do not connect or disconnect any cables while the power is on. Ensure all connections are correct and that there are no short circuits before powering on the device.
- Do not attempt unauthorized repairs. If any problems occur, please contact your supplier or authorized technical support.
- This manual applies only to this product model. Specifications and contents are subject to change without prior notice.
